Comme c'est un portable, il faut démonter le disque dur et le mettre dans une tour ou un boîtier externe et taper sous Linux dans le terminal :
aptitude install smartmontools
smartctl -options /dev/sda2
Où le disque peut être en fonction de ta configuration : hdxx, sdxx, etc…
Smartctl regorge d’options, pour afficher toutes les infos sur le disque dur on utilise « -a » pour « all ».
Puis un résultat s'affiche... dans ce cas d'exemple cela donnera :
# smartctl -a /dev/sdb1
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Raptor family
Device Model: WDC WD750GF-00GFR0
Serial Number: WD-GR458633907
Firmware Version: 345.6T13
User Capacity: 49,915,365,109 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 5
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sat Jun 29 10:14:38 2014 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (2672) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x00373) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x41) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 3) minutes.
Extended self-test routine
recommended polling time: ( 40) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SMART Attributes Data Structure revision number: 32
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 117 115 021 Pre-fail Always - 4691
4 Start_Stop_Count 0x0032 099 099 040 Old_age Always - 1341
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0
9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 3904
10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1314
194 Temperature_Celsius 0x0022 100 092 000 Old_age Always - 50
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0012 200 200 000 Old_age Always - 0
199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 3
200 Multi_Zone_Error_Rate 0x0009 200 179 051 Pre-fail Offline - 0
SMART Error Log Version: 1
No Errors Logged
Bien !
« No errors ». Le disque dur de test est en bon état !
Sinon pour info, la garantie s'applique si matériel neuf durant 1 an voir pour certaines marques 2 ans !